Civic 1.7l cylider head bolt torque sequence

Answers:
9 3 1 6 8
7 5 2 4 10
This is a generic sequence that will always work (excluding torque-yield bolts and exotic compression-type gasket materials, though it should work fine if you have a torque/rotation spec). Always start at the middle and work outward concentrically as shown. Start at 1/4th the torque specification and repeat the sequence incrementing 1/4th of the spec each time. After the full torque iteration, repeat at full torque until all the bolts quit turning. Voila.
ad
Relevant answers:
  • Torque sequence cylinder head bolts 94 Honda civic 1.5?
    22lbs on the first pass and then 47lbs on the second pass ...good to go
  • What is the specs for civic head cylinder bolt torque?
    for 88 thru 95 Step 1. Tighten all 10 bolts in sequence to 14 ft/lbs (20 Nm). Step 2. Tighten all 10 bolts in sequence to 36 ft/lbs (49 Nm). Step 3. Tighten all 10 bolts in sequence to...
  • What are the Torque specs for 94 Honda civic head bolts?
    134 ft-1bs is the torque for 94 civics
  • What is the head bolt torque sequence for a 2001 Daewoo Leganza?
    25nm then 3 lots of 90 degrees,10 head bolts,starting in the middle tighten in turn, middle bolt on exhaust side,bolt opposite on intake side,bolt on immediate right intake side bolt opposite on ex...
  • Pontiac 400 head bolt torque sequence?
    Torque sequence is: 7 3 1 5 9 8 4 2 6 10 Make sure all bolt threads and threads in the block are clean and lubricated lightly with oil. Pontiac do not need thread sealent since the bolts do not...

    • Can you answer these questions?